Kullanılmış makineler: CNC işleme merkezleri

This IBARMIA ZV 58/L7000 EXTREME Vertical Machining center was manufactured in the year 2017 and has under 4500 production hours. It is equipped with a HEIDENHAIN TNC 640 HSCI control unit and has 3 ...

This Rambaudi RC 270 Vertical Machining center was manufactured in the year 2014. It is equipped with a HEIDENHAIN iTNC 530 HSCI control unit and has 5 axis. The spindle speed is at 24000 rpm and ...

This TOS Optima Horizontal Machining center was manufactured in the year 2005 in Czech Republic and has 83171 production hours, of which 36511 are spindle hours. It is equipped with a HEIDENHAIN iTNC ...

This MATEC 30 HV (2003) Universal Machining Centre was manufactured in 2003 in Germany. It is controlled by a BOSCH TYPE 3 OSA Control unit. This CNC traveling column milling machine (3+2 axes) is ...

This HELLER MCP-H 250 Horizontal Machining Centre was manufactured in 1999 in Germany. It is equipped with a HELLER Unipro 90 control unit and a tool taper SK50. The pallet size is 630 x 500 mm and ...

This Vison Wide VTEC SF-2112 Vertical Machining center was made in 2014 and has 17000 production hours. It is equipped with a Fanuc Series Oi-MD control unit and has 3 axis. The machine has a spindle ...

This DECKEL MAHO DMU 100T (2004) 5-Axis Universal Machining Centre was manufactured in the year 2004. It is equipped with a MILL PLUS iT control. The machine has a new spindle, with only approximately ...

This AXA DBZ 2 / 50 3-Axis Vertical Machining Centre was manufactured in 2012 in Germany. It is equipped with a SK 50, DME 132.AM (Kessler) spindle with hollow shaft motor (water cooled) and a spindle ...

This OKUMA MB-46VAE Vertical Machining Centre was manufactured in 2005. It comes with a OKUMA CNC OSP-E100M control unit and a spindle speed of 8,000 rpm. It has 3 axis (X = 762 mm / Y = 460 mm / Z = ...

This DMG DMC 80 U duoBLOCK Universal Machining center was made in 2008 in Germany and has 28951 production hours, of which 14200 are spindle hours. It is equipped with a Heidenhain TNC 530 control ...

This Vison Wide VTEC SF-3120 Universal Machining center was manufactured in the year 2014 and has 17500 production hours. It is equipped with a Fanuc Series Oi-MD control unit and has 3 axis. The ...

This Deckel Maho DMC 65V Vertical Machining center was manufactured in the year 1999 in Germany and has 71146 production hours. It is equipped with a HEIDENHAIN control unit and has 4 axis. The ...

This AWEA VP2012 Vertical Machining center was manufactured in the year 1998. It is equipped with a SIEMENS 840 D control unit and has 3 axis. The machine has a spindle speed of 5000 rpm.

This MAZAK FJV-35/60 Vertical Machining center was manufactured in the year 2003. It is equipped with a MAZATROL PC-FUSION-CNC 640 M control unit. The machine has a spindle speed of 40-10000 rpm.

This Bridgeport VMC1000-22 Vertical Machining Center was manufactured in the year 2000 and has 12200 production hours. It is equipped with a HEIDENHAIN TNC 426P control unit and has 3 axis. The ...

This DMG DMC 1035 V ecoline Vertical Machining center was manufactured in the year 2012 in China. It is equipped with a SIEMENS SLIMline control unit and has 3 axis. The machine has a spindle speed of ...

This Doosan DNM 6700 Vertical Machining center was manufactured in the year 2016 in South Korea. It is equipped with a Doosan Fanuc i-Series control unit and has 3 axis. The machine has a spindle ...

This Heller MC 16 Horizontal Machining center was manufactured in the year 1998 in Germany. It is equipped with an Unipro CNC 90 control unit. The machine has a spindle speed of 16000 rpm.

This Heller MC 16 Horizontal Machining center was manufactured in the year 1999. It is equipped with a Unipro CNC 90 control unit. The machine has a spindle speed of 16000 rpm.
Control Unit

This HURCO VMX60/40T Vertical Machining center was manufactured in the year 2007. It is equipped with a MAX control unit and has 3 axis (X = 1524 mm / Y = 660 mm / Z = 610 mm). The machine has a ...

This TOYODA FH63S Horizontal Machining center was manufactured in the year 2002. It is equipped with a Fanuc Series 16i-M control unit. The machine has a spindle speed of 15000 rpm.
Control ...

This DMG MORI LASERTEC 65 3D Hybrid 5-axis precision machine for milling and laser machining was manufactured in the year 2014 in Germany. It is special for the ability to produce components using 3D ...

This DMG SAUER LASERTEC 50 5-axis laser precision machine was manufactured in the year 2010 in Germany. It is currently still in production but with direct availability. It is in a very good condition ...

This Deckel Maho DMU 50 T Vertical Machining center was manufactured in the year 1998 in Germany. It is equipped with a DMG GILDEMEISTER MillPlus control unit and has 3+2 axis.
Control Unit

This DMG MORI CMX 1100 V Vertical Machining Center was manufactured in the year 2019 in Japan and has 2664 production hours. It is equipped with a DMG Mori SLIMline control unit and has 4 axis. The ...

This HAAS UMC-500 Universal Machining center was manufactured in the year 2020 in the United States. It is equipped with a HAAS control unit and has 5 axis. The machine has a spindle speed of 15000 ...

This Mazak HCN-5000 Horizontal Machining center was manufactured in the year 2018. It is equipped with a Mazak Smooth G control unit. The machine has a spindle speed of 18000 rpm.
General ...

This HAAS UMC-500SS Vertical Machining center was manufactured in the year 2021 in the United States. It is equipped with a HAAS control unit and has 5 axis. The machine has a spindle speed of 15000 ...

This WEMAS VZG 65-5A Vertical Machining center was manufactured in the year 2018 in Germany. It is equipped with a HEIDENHAIN TNC640 control unit and has 5 axis. The machine has a spindle speed of ...

This HAAS UMC-500SS Universal Machining center was manufactured in the year 2021 in the United States. It is equipped with a HAAS CNC control unit and has 5 axis. The machine has a spindle speed of ...

This DMG Mori DMU 50 Universal Machining center was manufactured in the year 2005 in Germany and has only 2,870 spindle hours (15,380h control on). It is equipped with a SIEMENS SINUMERIK 840D control ...

This KIA KV 35C Vertical Machining center was manufactured in the year 2006 in Japan. It is equipped with a Fanuc Series O-M control unit and has 3 axis. The machine has a spindle speed of 10000 ...

This DMG DMU70 Vertical Machining center was manufactured in the year 2007 in Germany and has 45808 production hours of which 25900 are spindle hours. It is equipped with a HEIDENHAIN 530 control unit ...

This AXA DBZ Vertical Machining center was manufactured in the year 2008 in Germany and has 58513 production hours, of which 23672 are spindle hours. It is equipped with a HEIDENHAIN ITNC530 control ...

This SPINNER VC560 Vertical Machining center was manufactured in the year 2006. It is equipped with a SIEMENS SINUMERIK control unit and has 4 axis.
Control Unit
Brand: SIEMENS

This Deckel Maho DMU 50 Vertical Machining center was manufactured in the year 2005 and has 15380 production hours, of which 2870 are spindle hours. It is equipped with a SIEMENS SINUMERIK 840D ...

This POSmill H 800 U Universal Machining center was manufactured in the year 2019. It is equipped with a HEIDENHAIN TNC i 530 control unit and has 5 axis. The machine has a spindle speed of 18000 ...

This DMG MORI DMP 70 with WH3 Vertical Machining centre was manufactured in the year 2021. It is equipped with a DMG MORI control unit. The machine disposes of a spindle with a speed range of 24000 ...

This Deckel Maho DMC 103 V Vertical Machining Center was manufactured in the year 1998. It is controlled by a SIEMENS SINUMERIK 810 D control unit. This 3-axis CNC milling machine has a spindle speed ...

This HAAS VF4-SS Vertical Machining Centre was made in the year 2019 in the United States. It is equipped with a Haas control unit and BT 40 tool holder with 30 slots in storage. As a 3 axis machine ...

This MAKINO a120nx Horizontal Machining center was manufactured in the year 2017. It is equipped with a Makino CNC Professional 6 control unit and has 3 axis. The machine has a spindle speed of ...

This Vertical Machining centre Hyundai Wia F500D was manufactured in the year 2012 in South Korea ans has 8508 operating hours. It is equipped with a Fanuc i Series. The machine includes a ...

This Quaser UX600/15C Vertical Machining Center was manufactured in the year 2015 in Taiwan. It is a 5 axis machine with direct measurement on all axis operated by a Heidenhain iTNC 530 control. With ...

This Stama MC 535 Vertical Machining center was manufactured in the year 2001 in Germany. It is equipped with 4 t-slots and operates with 3-axis. The max. workpiece weight is 3000 kg and the max. ...

This Fanuc Robodrill D21MiA5 Vertical Machining center was manufactured in the year 2014. It has 4 axis. The machine has a spindle speed of 21000 rpm. Open the attached PDF document to see all ...

This HAAS UMC750SS Vertical machining centre was manufactured in the year 2019 in the United States. It is equipped with a HAAS control unit with Ethernet interface. The machine disposes of a 1 GB of ...

This HAAS VF4SS used vertical machining centre was manufactured in the year 2019 in the United States. It is equipped with a HAAS control unit and has an Ethernet interface. The HAAS 5th axis ...

This AGIE CHARMILLES MIKRON HSM 400 LP Vertical Machining center was manufactured in the year 2013 in Switzerland and has 18727 production hours, of which 18377 are spindle hours. It is equipped with ...

This DMG MORI DMU 95 monoBLOCK Universal Machining center was manufactured in the year 2019 in Germany. It is equipped with a CELOS HEIDENHAIN ITNC 640 ErgoLine control unit and has 5 axis. The ...

This HAAS TM 2 Vertical Machining center was manufactured in the year 2021. It is equipped with a HAAS control unit. The machine has a spindle speed of 4000 rpm.
Main drive
Spindle speed ...